AC-DC 분류검색 (총:617개)
   UNIT type | Single (1CH) (348개)   Dual (2CH) (38개)   Triple (3CH) (17개)  
   MODULE type | Single (1CH) (92개)   Dual (2CH) (8개)   Triple (3CH) (3개)  
   OPEN PCB type | Single (1CH) (46개)   Dual (2CH) (10개)   Triple (3CH) (2개)  
   CHASSIS type | Single (1CH) (14개)  
   DIN Rail type | Single (1CH) (39개)  
   제조업체별 검색 | DANUBE (37개) 델타 (18개) 민웰 (231개) 은성파워 (15개) 지엠텍 (10개) 코텍 (152개) 파워렉스 (42개) 파워프라자 (111개) 피닉스 (1개)
   TIP: 실시간 검색시 CTRL+클릭 또는 마우스 드래그 하시면 멀티선택을 할 수 있습니다.
AC-DC 실시간검색 (총:617개)
절연방식

[초기화]
 
케이스타입

[초기화]
 
시리즈명

[초기화]
 
출력수

[초기화]
 
출력전력(W)

[초기화]
 
입력전압 (AC)

[초기화]
 
입력전압 (DC)

[초기화]
 
출력전압CH1

[초기화]
 
출력전류CH1

[초기화]
 
출력전압CH2

[초기화]
 
출력전류CH2

[초기화]
 
출력전압CH3

[초기화]
 
출력전류CH3

[초기화]
 
사이즈(WxHxD)mm

[초기화]
 
                    
  38 개의 제품이 검색되었습니다.
No 이미지 제품설명 ※인증서보기 인증마크 클릭※ 재고 자료 수량가격 (VAT별도) 분류 구매
38

제품의 사양

 INPUT

 Voltage

 AC90 ~ 264V (or DC120 ~ 340V) (note)

 Current

 0.89A max.

 Frequency

 47 ~ 440Hz max. (50 ~ 60Hz typ.)

 Efficiency

 77% Typ.

 Inrush current

 30A max. @ 110Vac / 60A max. @220Vac

 Leakage current

 0.5mA max. @ 110Vac / 0.75mA max. @ 220Vac

 OUTPUT

 Voltage adj. Range

 ±10% typ. @ Output1

 Ripple and noise

 1% max.

 Line regulation

 ±1% max.

 Load regulation

 ±1% max. @ Output1 / ±2% max. @ Output2

 Dynamic load regulation

 ±3% max. @ Output1

 Temperature drift

 ±1% typ.

 Rising time

 100ms max.

 Holding time

 17ms min.

 Min load  output 1 current > output 2 current (dual)

PROTECTION

CIRCUIT

 Over current protection

 Over 105% of rating (Auto-restart)

 Over voltage protection

 115 ~ 140% of rating

 Over temperature protection

 80°C min. (Latch-up mode)

ELECTRICALLY

ISOLATED

 Input - Output

 AC 3kV, 1minute, 10mA / DC 500V, 100MOhms min.

 Input - FG

 AC 2kV, 1minute, 10mA / DC 500V, 100MOhms min.

 Output - FG

 AC 0.5kV, 1minute, 10mA / DC 500V, 70MOhms min.

OTHERS

 Case size

 25 X 79 X 98 mm (single) / 35x83x125 mm (Dual)

 Weight

 270 g or less (single) / 370g or less (Dual)

 NOTE : For cases where conformance to various safety specs (UL, CSA, CE, etc) are required, input voltage and frequency range will be

 100 - 240VAC, 50 / 60Hz.


창닫기
CD30-55 C Series [제조사:파워프라자 - 생산국:Korea]
[입력전압: AC90~264 or DC120~340V], [출력전압/전류CH1: 5V/3A], [출력전압/전류CH2: 5V/3A], 30W, dual, Screw, Unit, 효율:75%, 370g

33개

1~1 : 37,200원
2~4 : 36,800원
5~9 : 36,500원
10~19 : 35,700원
20~49 : 35,300원
50~99 : 35,000원
판매중


37

제품의 사양

 INPUT

 Voltage

 AC90 ~ 264V (or DC120 ~ 340V) (note)

 Current

 0.89A max.

 Frequency

 47 ~ 440Hz max. (50 ~ 60Hz typ.)

 Efficiency

 77% Typ.

 Inrush current

 30A max. @ 110Vac / 60A max. @220Vac

 Leakage current

 0.5mA max. @ 110Vac / 0.75mA max. @ 220Vac

 OUTPUT

 Voltage adj. Range

 ±10% typ. @ Output1

 Ripple and noise

 1% max.

 Line regulation

 ±1% max.

 Load regulation

 ±1% max. @ Output1 / ±2% max. @ Output2

 Dynamic load regulation

 ±3% max. @ Output1

 Temperature drift

 ±1% typ.

 Rising time

 100ms max.

 Holding time

 17ms min.

 Min load  output 1 current > output 2 current (dual)

PROTECTION

CIRCUIT

 Over current protection

 Over 105% of rating (Auto-restart)

 Over voltage protection

 115 ~ 140% of rating

 Over temperature protection

 80°C min. (Latch-up mode)

ELECTRICALLY

ISOLATED

 Input - Output

 AC 3kV, 1minute, 10mA / DC 500V, 100MOhms min.

 Input - FG

 AC 2kV, 1minute, 10mA / DC 500V, 100MOhms min.

 Output - FG

 AC 0.5kV, 1minute, 10mA / DC 500V, 70MOhms min.

OTHERS

 Case size

 25 X 79 X 98 mm (single) / 35x83x125 mm (Dual)

 Weight

 270 g or less (single) / 370g or less (Dual)

 NOTE : For cases where conformance to various safety specs (UL, CSA, CE, etc) are required, input voltage and frequency range will be

 100 - 240VAC, 50 / 60Hz.


창닫기
CD30-52 C Series [제조사:파워프라자 - 생산국:Korea]
[입력전압: AC90~264 or DC120~340V], [출력전압/전류CH1: 5V/3A], [출력전압/전류CH2: 12V/1.2A], 30W, dual, Screw, Unit, 효율:77%, 370g

11개

1~1 : 37,200원
2~4 : 36,800원
5~9 : 36,500원
10~19 : 35,700원
20~49 : 35,300원
50~99 : 35,000원
판매중


36

제품의 사양

 INPUT

 Voltage

 AC90 ~ 264V (or DC120 ~ 340V) (note)

 Current

 0.89A max.

 Frequency

 47 ~ 440Hz max. (50 ~ 60Hz typ.)

 Efficiency

 77% Typ.

 Inrush current

 30A max. @ 110Vac / 60A max. @220Vac

 Leakage current

 0.5mA max. @ 110Vac / 0.75mA max. @ 220Vac

 OUTPUT

 Voltage adj. Range

 ±10% typ. @ Output1

 Ripple and noise

 1% max.

 Line regulation

 ±1% max.

 Load regulation

 ±1% max. @ Output1 / ±2% max. @ Output2

 Dynamic load regulation

 ±3% max. @ Output1

 Temperature drift

 ±1% typ.

 Rising time

 100ms max.

 Holding time

 17ms min.

 Min load  output 1 current > output 2 current (dual)

PROTECTION

CIRCUIT

 Over current protection

 Over 105% of rating (Auto-restart)

 Over voltage protection

 115 ~ 140% of rating

 Over temperature protection

 80°C min. (Latch-up mode)

ELECTRICALLY

ISOLATED

 Input - Output

 AC 3kV, 1minute, 10mA / DC 500V, 100MOhms min.

 Input - FG

 AC 2kV, 1minute, 10mA / DC 500V, 100MOhms min.

 Output - FG

 AC 0.5kV, 1minute, 10mA / DC 500V, 70MOhms min.

OTHERS

 Case size

 25 X 79 X 98 mm (single) / 35x83x125 mm (Dual)

 Weight

 270 g or less (single) / 370g or less (Dual)

 NOTE : For cases where conformance to various safety specs (UL, CSA, CE, etc) are required, input voltage and frequency range will be

 100 - 240VAC, 50 / 60Hz.


창닫기
CD30-54 C Series [제조사:파워프라자 - 생산국:Korea]
[입력전압: AC90~264 or DC120~340V], [출력전압/전류CH1: 5V/3A], [출력전압/전류CH2: 24V/0.6A], 30W, dual, Screw, Unit, 효율:78%, 370g

16개

1~1 : 37,200원
2~4 : 36,800원
5~9 : 36,500원
10~19 : 35,700원
20~49 : 35,300원
50~99 : 35,000원
판매중


35

제품의 사양

 INPUT

 Voltage

 AC90 ~ 264V (or DC120 ~ 340V) (note)

 Current

 0.89A max.

 Frequency

 47 ~ 440Hz max. (50 ~ 60Hz typ.)

 Efficiency

 77% Typ.

 Inrush current

 30A max. @ 110Vac / 60A max. @220Vac

 Leakage current

 0.5mA max. @ 110Vac / 0.75mA max. @ 220Vac

 OUTPUT

 Voltage adj. Range

 ±10% typ. @ Output1

 Ripple and noise

 1% max.

 Line regulation

 ±1% max.

 Load regulation

 ±1% max. @ Output1 / ±2% max. @ Output2

 Dynamic load regulation

 ±3% max. @ Output1

 Temperature drift

 ±1% typ.

 Rising time

 100ms max.

 Holding time

 17ms min.

 Min load  output 1 current > output 2 current (dual)

PROTECTION

CIRCUIT

 Over current protection

 Over 105% of rating (Auto-restart)

 Over voltage protection

 115 ~ 140% of rating

 Over temperature protection

 80°C min. (Latch-up mode)

ELECTRICALLY

ISOLATED

 Input - Output

 AC 3kV, 1minute, 10mA / DC 500V, 100MOhms min.

 Input - FG

 AC 2kV, 1minute, 10mA / DC 500V, 100MOhms min.

 Output - FG

 AC 0.5kV, 1minute, 10mA / DC 500V, 70MOhms min.

OTHERS

 Case size

 25 X 79 X 98 mm (single) / 35x83x125 mm (Dual)

 Weight

 270 g or less (single) / 370g or less (Dual)

 NOTE : For cases where conformance to various safety specs (UL, CSA, CE, etc) are required, input voltage and frequency range will be

 100 - 240VAC, 50 / 60Hz.


창닫기
CD30-1212 C Series [제조사:파워프라자 - 생산국:Korea]
[입력전압: AC90~264 or DC120~340V], [출력전압/전류CH1: 12V/1.2A], [출력전압/전류CH2: 12V/1.2A], 30W, dual, Screw, Unit, 효율:78%, 370g

14개

1~1 : 37,200원
2~4 : 36,800원
5~9 : 36,500원
10~19 : 35,700원
20~49 : 35,300원
50~99 : 35,000원
판매중


34

제품의 사양

 INPUT

 Voltage

 AC90 ~ 264V (or DC120 ~ 340V) (note)

 Current

 0.89A max.

 Frequency

 47 ~ 440Hz max. (50 ~ 60Hz typ.)

 Efficiency

 77% Typ.

 Inrush current

 30A max. @ 110Vac / 60A max. @220Vac

 Leakage current

 0.5mA max. @ 110Vac / 0.75mA max. @ 220Vac

 OUTPUT

 Voltage adj. Range

 ±10% typ. @ Output1

 Ripple and noise

 1% max.

 Line regulation

 ±1% max.

 Load regulation

 ±1% max. @ Output1 / ±2% max. @ Output2

 Dynamic load regulation

 ±3% max. @ Output1

 Temperature drift

 ±1% typ.

 Rising time

 100ms max.

 Holding time

 17ms min.

 Min load  output 1 current > output 2 current (dual)

PROTECTION

CIRCUIT

 Over current protection

 Over 105% of rating (Auto-restart)

 Over voltage protection

 115 ~ 140% of rating

 Over temperature protection

 80°C min. (Latch-up mode)

ELECTRICALLY

ISOLATED

 Input - Output

 AC 3kV, 1minute, 10mA / DC 500V, 100MOhms min.

 Input - FG

 AC 2kV, 1minute, 10mA / DC 500V, 100MOhms min.

 Output - FG

 AC 0.5kV, 1minute, 10mA / DC 500V, 70MOhms min.

OTHERS

 Case size

 25 X 79 X 98 mm (single) / 35x83x125 mm (Dual)

 Weight

 270 g or less (single) / 370g or less (Dual)

 NOTE : For cases where conformance to various safety specs (UL, CSA, CE, etc) are required, input voltage and frequency range will be

 100 - 240VAC, 50 / 60Hz.


창닫기
CD30-1515 C Series [제조사:파워프라자 - 생산국:Korea]
[입력전압: AC90~264 or DC120~340V], [출력전압/전류CH1: 15V/1A], [출력전압/전류CH2: 15V/1A], 30W, dual, Screw, Unit, 효율:78%, 370g

28개

1~1 : 37,200원
2~4 : 36,800원
5~9 : 36,500원
10~19 : 35,700원
20~49 : 35,300원
50~99 : 35,000원
판매중


33

제품의 사양

 INPUT

 Norminal Input Voltage

 100-120VAC, 200-240VAC (Selectable by Switch)

 Input Voltage Range

 85-132VAC, 170-264VAC (Selectable by Switch)

 Nominal Input Frequency

 50 ~ 60Hz

 Input Frequency Range

 47-63Hz

 Input Current

 < 2.00A @ 115VAC, < 1.20A @ 230VAC

 Efficiency at 100% Load

 > 82.0% typ. @230Vac

 Max Inrush Current   < 45A @ 230VAC
 Leakage Current  < 0.4mA @ 240VAC

 OUTPUT

 Nominal Output Voltage

 V1: 12Vdc, V2: 5Vdc

 Output Voltage Tolerance

 ±1% (initial set point tolerance from factory) 

 Output Voltage Adjustment

 V1: 10.8-13.2Vdc

 Output Current

 V1: 7.00A, V2: 3.00A

 Output Power

 99W

 Line Regulation

 0.5% typ. (@ 100-132VAC & 200-264VAC)

 Load Regulation

 V1: ±1% typ. (@100-132Vac & 200-264Vac), V2: ±2% typ. (@100-132Vac & 200-264Vac)

 PARD (20MHz)

 V1: <120mVpp, V2: <80mVpp

 Rise Time  < 30ms @ 115Vac & 230Vac (100% load)
 Start-up Time  < 1200ms @ 115Vac, < 2000ms @ 230Vac (100% load)
 Hold-up Time  > 20ms @ 115Vac, >25ms @ 230Vac
 Dynamic Response  ± 5% @ 0-100% load
 Start-up with Capacitive  8.000uF Max

PROTECTION

CIRCUIT

 Overvoltage

 115-135%, Hicc-up Mode, Non-Latching (Auto-Recovery)

 Overload/Overcurrent

 > 110-150% Hicc-up Mode, Non-Latching (Auto-Recovery)

 Over Temperature  Hicc-up Mode, Non-Latching (Auto-Recovery when the fault is removed)
 Short Circuit  Hicc-up Mode, Non-Latching (Auto-Recovery when the fault is removed)
 Protection Against Shock  Class | with PE* connection

Reliability

DATA

 MTBF

 > 700,000 hrs.

 Expected Cap Life Time

 10 years (115VAC & 230VAC, 50% load @ 40°C)

OTHERS

 Case size

 97x38x158 mm (W x H x D)

 Weight

 420g or less

Notes

  1) All parameters are specified at 25°C ambient unless otherwise noted

 


창닫기
PMT-D1V100W1A PMT Series [제조사:델타 - 생산국:China]
[입력전압: AC85~132/170~264V], [출력전압/전류CH1: 5V/3A], [출력전압/전류CH2: 12V/7A], 100W, dual, Screw, Unit, 효율:82%, 450g

1개
1~1 : 32,800원
2~9 : 32,500원
10~19 : 32,100원
20~39 : 31,800원
40~99 : 31,200원
100~299 : 30,400원
판매중


32

제품의 사양

 INPUT

 Norminal Input Voltage

 100-120VAC, 200-240VAC (Selectable by Switch)

 Input Voltage Range

 85-132VAC, 170-264VAC (Selectable by Switch)

 Nominal Input Frequency

 50 ~ 60Hz

 Input Frequency Range

 47-63Hz

 Input Current

 < 2.00A @ 115VAC, < 1.20A @ 230VAC

 Efficiency at 100% Load

 > 84.0% typ. @230Vac

 Max Inrush Current   < 45A @ 230VAC
 Leakage Current  < 0.2mA @ 240VAC

 OUTPUT

 Nominal Output Voltage

 V1: 24Vdc, V2: 5Vdc

 Output Voltage Tolerance

 ±1% (initial set point tolerance from factory) 

 Output Voltage Adjustment

 V1: 21.6-26.4Vdc

 Output Current

 V1: 3.50A, V2: 3.00A

 Output Power

 99W

 Line Regulation

 0.5% typ. (@ 100-132VAC & 200-264VAC)

 Load Regulation

 V1: ±1% typ. (@100-132Vac & 200-264Vac), V2: ±2% typ. (@100-132Vac & 200-264Vac)

 PARD (20MHz)

 V1: <120mVpp, V2: <80mVpp

 Rise Time  < 30ms @ 115Vac & 230Vac (100% load)
 Start-up Time  < 1200ms @ 115Vac, < 2000ms @ 230Vac (100% load)
 Hold-up Time  < 20ms @ 115Vac, > 25ms @ 230Vac
 Dynamic Response  ± 5% @ 0-100% load
 Start-up with Capacitive  8.000uF Max

PROTECTION

CIRCUIT

 Overvoltage

 115-135%, Hicc-up Mode, Non-Latching (Auto-Recovery)

 Overload/Overcurrent

 > 110-150% Hicc-up Mode, Non-Latching (Auto-Recovery)

 Over Temperature  Hicc-up Mode, Non-Latching (Auto-Recovery when the fault is removed)
 Short Circuit  Hicc-up Mode, Non-Latching (Auto-Recovery when the fault is removed)
 Protection Against Shock  Class | with PE* connection

Reliability

DATA

 MTBF

 > 700,000 hrs.

 Expected Cap Life Time

 10 years (115VAC & 230VAC, 50% load @ 40°C)

OTHERS

 Case size

 97x38x158 mm (W x H x D)

 Weight

 420g or less

Notes

  1) All parameters are specified at 25°C ambient unless otherwise noted

 


창닫기
PMT-D2V100W1A PMT Series [제조사:델타 - 생산국:China]
[입력전압: AC85~132/170~264V], [출력전압/전류CH1: 5V/3A], [출력전압/전류CH2: 24V/3.5A], 100W, dual, Screw, Unit, 효율:84%, 420g

2개
1~1 : 32,800원
2~9 : 32,500원
10~19 : 32,100원
20~39 : 31,800원
40~99 : 31,200원
100~299 : 30,400원
판매중


31

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 78%

 AC Current (Typ.)

 0.75A / 115VAC 0.5A / 230VAC

 Inrush Current (Typ.)   Cold start 45A
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1-5V / CH2-12V

 Rated Current

 CH1-5A / CH2-1.5A

 Current Range

 0.5 ~ 5A / 0.1 ~ 1.5A

 Rated Power

 32W

 Ripple & Noise(max.) note.2

 80mVp-p / 120mVp-p

 Voltage ADJ. Range

 CH1:4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±6.0%

 Line Regulation note.4

 ±0.5% / ±1.0%

 Load egulation note.5  ±1.5% / ±3.0%
 Setup, Rise time  500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  50ms/230VAC 10ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 CH1:5.75 ~ 6.75V

 Protection type : Shut down o/p voltage, re-power on to recover

SAFETY & EMC

 Safety Standards

 UL60950-1, CB(IEC60950-1), CCC GB4943 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

 EMC Emission  Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC Immunity  Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1, light industry level, criteria A

OTHERS

 MTBF

 402.7Khrs min. MIL-HDBK-217F (25°C)

 Case size

 97 X 36 X 99 mm

 Weight  360 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"


창닫기
NED35-A NE Series [제조사:민웰 - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 5V/4A], [출력전압/전류CH2: 12V/1A], 35W, dual, Screw, Unit, 효율:78%, 360g

0개

1~1 : 22,900원
2~9 : 22,700원
10~19 : 22,400원
20~29 : 22,000원
30~39 : 21,800원
40~99 : 21,500원
판매중


30

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 81%

 AC Current (Typ.)

 0.75A / 115VAC 0.5A / 230VAC

 Inrush Current (Typ.)   Cold start 45A
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1-5V / CH2-24V

 Rated Current

 CH1-4A / CH2-1.3A

 Current Range

 0.5 ~ 4A / 0.2 ~ 1.3A

 Rated Power

 35W

 Ripple & Noise(max.) note.2

 80mVp-p / 200mVp-p

 Voltage ADJ. Range

 CH1:4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±6.0%

 Line Regulation note.4

 ±0.5% / ±1.0%

 Load egulation note.5  ±1.5% / ±3.0%
 Setup, Rise time  500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  50ms/230VAC 10ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 CH1:5.75 ~ 6.75V

 Protection type : Shut down o/p voltage, re-power on to recover

SAFETY & EMC

 Safety Standards

 UL60950-1, CB(IEC60950-1), CCC GB4943 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

 EMC Emission  Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC Immunity  Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1, light industry level, criteria A

OTHERS

 MTBF

 402.7Khrs min. MIL-HDBK-217F (25°C)

 Case size

 97 X 36 X 99 mm

 Weight  360 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"


창닫기
NED35-B NE Series [제조사:민웰 - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 5V/2.2A], [출력전압/전류CH2: 24V/1A], 35W, dual, Screw, Unit, 효율:81%, 360g

0개

1~1 : 22,900원
2~9 : 22,700원
10~19 : 22,400원
20~29 : 22,000원
30~39 : 21,800원
40~99 : 21,500원
판매중


29

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 79%

 AC Current (Typ.)

 1.1A / 115VAC 0.65A / 230VAC

 Inrush Current (Typ.)   Cold start 45A
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1: 5V/6A, CH2: 12V/2A 

 Rated Current

 CH1: 6A, CH2: 3A

 Current Range

 CH1: 1~6A, CH2: 0.3~3A

 Rated Power

 54W

 Ripple & Noise(max.) note.2

 80mVp-p / 120mVp-p

 Voltage ADJ. Range

 CH1: 4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±6.0%

 Line Regulation note.4

 ±0.5% / ±1.0%

 Load egulation note.5  ±1.5% / ±3.0%
 Setup, Rise time  500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  50ms/230VAC 10ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 5.75 ~ 6.75V

 Protection type : Shut down o/p voltage, re-power on to recover

SAFETY & EMC

 Safety Standards

 UL60950-1, CB(IEC60950-1), CCC GB4943 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

 EMC Emission  Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC Immunity  Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1, light industry level, criteria A

OTHERS

 MTBF

 374.2Khrs min. MIL-HDBK-217F (25°C)

 Case size

 98 X 38 X 129 mm

 Weight  440 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"


창닫기
NED50-A NE Series [제조사:민웰 - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 5V/6A], [출력전압/전류CH2: 12V/2A], 50W, dual, Screw, Unit, 효율:79%, 440g

0개

1~1 : 26,700원
2~9 : 26,400원
10~19 : 26,200원
20~29 : 25,600원
30~39 : 25,400원
40~99 : 25,100원
판매중


28

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 82%

 AC Current (Typ.)

 1.1A / 115VAC 0.65A / 230VAC

 Inrush Current (Typ.)   Cold start 45A
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1: 5V, CH2: 24V 

 Rated Current

 CH1: 6A, CH2: 2.0A

 Current Range

 CH1: 1~6A, CH2: 0.2~2A

 Rated Power

 53.6W

 Ripple & Noise(max.) note.2

 80mVp-p / 200mVp-p

 Voltage ADJ. Range

 CH1: 4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±6.0%

 Line Regulation note.4

 ±0.5% / ±1.0%

 Load egulation note.5  ±1.5% / ±3.0%
 Setup, Rise time  500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  50ms/230VAC 10ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 5.75 ~ 6.75V

 Protection type : Shut down o/p voltage, re-power on to recover

SAFETY & EMC

 Safety Standards

 UL60950-1, CB(IEC60950-1), CCC GB4943 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

 EMC Emission  Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC Immunity  Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1, light industry level, criteria A

OTHERS

 MTBF

 374.2Khrs min. MIL-HDBK-217F (25°C)

 Case size

 98 X 38 X 129 mm

 Weight  440 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"


창닫기
NED50-B NE Series [제조사:민웰 - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 5V/4A], [출력전압/전류CH2: 24V/1.4A], 50W, dual, Screw, Unit, 효율:82%, 440g

0개

1~1 : 26,700원
2~9 : 26,400원
10~19 : 26,200원
20~29 : 25,600원
30~39 : 25,400원
40~99 : 25,100원
판매중


27

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 78%

 AC Current (Typ.)

 1.5A / 115VAC 0.9A / 230VAC

 Inrush Current (Typ.)   Cold start 45A
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1:5V / CH2:12V

 Rated Current

 CH1:8A / CH2: 4A

 Current Range

 1 ~ 8A / 0.3 ~ 4A

 Rated Power

 71W

 Ripple & Noise(max.) note.2

 80mVp-p / 120mVp-p

 Voltage ADJ. Range

 CH1: 4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±6.0%

 Line Regulation note.4

 ±0.5% / ±1.0%

 Load egulation note.5  ±1.5% / ±3.0%
 Setup, Rise time  500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  50ms/230VAC 10ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 5.75 ~ 6.75V

 Protection type : Shut down o/p voltage, re-power on to recover

SAFETY & EMC

 Safety Standards

 UL60950-1, CB(IEC60950-1), CCC GB4943 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

 EMC Emission  Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC Immunity  Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1, light industry level, criteria A

OTHERS

 MTBF

 381.3Khrs min. MIL-HDBK-217F (25°C)

 Case size

 97 X 38 X 159 mm

 Weight  520 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"


창닫기
NED75-A NE Series [제조사:민웰 - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 5V/7A], [출력전압/전류CH2: 12V/3A], 75W, dual, Screw, Unit, 효율:78%, 520g

0개

1~1 : 31,300원
2~9 : 31,000원
10~19 : 30,700원
20~29 : 30,000원
30~39 : 29,700원
40~99 : 29,400원
판매중


26

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 81%

 AC Current (Typ.)

 1.5A / 115VAC 0.9A / 230VAC

 Inrush Current (Typ.)   Cold start 45A
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1:5V / CH2:24V

 Rated Current

 CH1:6A / CH2: 3A

 Current Range

 1 ~ 6A / 0.2 ~ 3A

 Rated Power

 73W

 Ripple & Noise(max.) note.2

 80mVp-p / 200mVp-p

 Voltage ADJ. Range

 CH1: 4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±6.0%

 Line Regulation note.4

 ±0.5% / ±1.0%

 Load egulation note.5  ±1.5% / ±3.0%
 Setup, Rise time  500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  50ms/230VAC 10ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 5.75 ~ 6.75V

 Protection type : Shut down o/p voltage, re-power on to recover

SAFETY & EMC

 Safety Standards

 UL60950-1, CB(IEC60950-1), CCC GB4943 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

 EMC Emission  Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC Immunity  Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1, light industry level, criteria A

OTHERS

 MTBF

 381.3Khrs min. MIL-HDBK-217F (25°C)

 Case size

 97 X 38 X 159 mm

 Weight  520 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"


창닫기
NED75-B NE Series [제조사:민웰 - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 5V/5A], [출력전압/전류CH2: 24V/2A], 75W, dual, Screw, Unit, 효율:81%, 520g

0개

1~1 : 31,300원
2~9 : 31,000원
10~19 : 30,700원
20~29 : 30,000원
30~39 : 29,700원
40~99 : 29,400원
판매중


25

제품의 사양

 INPUT

 Voltage Range

 88~132VAC / 176~264VAC selected by switch 248 ~ 373VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 80%

 AC Current (Typ.)

 2A / 115VAC  1.2A / 230VAC

 Inrush Current (Typ.)   COLD START 45A
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1: 5V, CH2: 12V

 Rated Current

 CH1: 10A, CH2: 7.0A 

 Current Range

 CH1: 2~10A, CH2: 0.7 ~ 7.0A

 Rated Power

 100.4W

 Ripple & Noise(max.) note.2

 80mVp-p / 120mVp-p

 Voltage ADJ. Range

 CH1: 4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±10%

 Line Regulation note.4

 ±0.5% / ±0.5%

 Load egulation note.5  ±1.0% / ±5.0%
 Setup, Rise time  2000ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  25ms/230VAC 20ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Constant current limiting, recovers automatically after fault condition is removed

 Over voltage

 5.75 ~ 6.75V

 Protection type : Shut down O/P voltage, re-power on to recover

SAFETY & EMC

 Safety Standards

 UL60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

OTHERS

 MTBF

 320.7Khrs min. MIL-HDBK-217F (25°C)

 Case size

 199 X 98 X 38 mm (L*W*H)

 Weight  550 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"


창닫기
NED100-A NE Series [제조사:민웰 - 생산국:China]
[입력전압: AC90~132/180~264 or DC254~373V], [출력전압/전류CH1: 5V/10A], [출력전압/전류CH2: 12V/4.2A], 100W, dual, Screw, Unit, 효율:80%, 550g

0개

1~1 : 45,800원
2~9 : 45,300원
10~19 : 44,900원
20~29 : 44,000원
30~39 : 43,500원
40~99 : 43,100원
판매중


24

제품의 사양

 INPUT

 Voltage Range

 88~132VAC / 176~264VAC selected by switch 248 ~ 373VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 82%

 AC Current (Typ.)

 2A / 115VAC  1.2A / 230VAC

 Inrush Current (Typ.)   COLD START 45A
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1: 5V, CH2: 24V

 Rated Current

 CH1: 10A, CH2: 3.5A 

 Current Range

 CH1: 1~10A, CH2: 0.3 ~ 3.5A

 Rated Power

 100W

 Ripple & Noise(max.) note.2

 80mVp-p / 200mVp-p

 Voltage ADJ. Range

 CH1: 4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±8.0%

 Line Regulation note.4

 ±0.5% / ±0.5%

 Load egulation note.5  ±1.0% / ±4.0%
 Setup, Rise time  2000ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  25ms/230VAC 20ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Constant current limiting, recovers automatically after fault condition is removed

 Over voltage

 5.75 ~ 6.75V

 Protection type : Shut down O/P voltage, re-power on to recover

SAFETY & EMC

 Safety Standards

 UL60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

OTHERS

 MTBF

 320.7Khrs min. MIL-HDBK-217F (25°C)

 Case size

 199 X 98 X 38 mm (L*W*H)

 Weight  550 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"


창닫기
NED100-B NE Series [제조사:민웰 - 생산국:China]
[입력전압: AC90~132/180~264 or DC254~373V], [출력전압/전류CH1: 5V/8A], [출력전압/전류CH2: 24V/2.5A], 100W, dual, Screw, Unit, 효율:82%, 550g

0개

1~1 : 45,800원
2~9 : 45,300원
10~19 : 44,900원
20~29 : 44,000원
30~39 : 43,500원
40~99 : 43,100원
판매중


23

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 79%

 AC Current (Typ.)

 0.8A / 115VAC 0.55A / 230VAC

 Inrush Current (Typ.)   Cold start 45A/230VAC
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1-5V / CH2-12V

 Rated Current

 CH1-4A / CH2-1A

 Current Range

 0 ~ 4A / 0~ 1A

 Rated Power

 32W

 Ripple & Noise(max.) note.2

 80mVp-p / 120mVp-p

 Voltage ADJ. Range

 CH1:4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±6.0%

 Line Regulation note.4

 ±0.5% / ±1.5%

 Load egulation note.5  ±0.5% / ±3.0%
 Setup, Rise time  500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  80ms/230VAC 16ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 CH1:5.75 ~ 6.75V

 Protection type : Shut down o/p voltage, re-power on to recover

SAFETY & EMC

 Safety Standards

 UL62368-1, TUV EN62368-1, EAC TP TC 004 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:2KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

 EMC Emission  Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC Immunity  Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1, light industry level, criteria A

OTHERS

 MTBF

 179Khrs min. MIL-HDBK-217F (25°C)

 Case size

 99 X 82 X 36 mm

 Weight  300 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"

 NOTE7. The anbient temperature deratin of 3.5°C/1000m with fanless models and of 5°c/1000m with fan models for operating altitude higher than 2000m(6500ft).


창닫기
RD35-A R Series [제조사:민웰 - 생산국:China]
[입력전압: 88 ~ 264VAC 125 ~ 373VDC V], [출력전압/전류CH1: 5V/4A], [출력전압/전류CH2: 12V/1A], 32W, dual, Isolated, Screw, Unit, 300g

10개
1~1 : 18,500원
2~9 : 18,300원
10~19 : 18,100원
20~29 : 17,800원
30~39 : 17,600원
40~99 : 17,400원
판매중


22

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 80%

 AC Current (Typ.)

 0.8A / 115VAC 0.55A / 230VAC

 Inrush Current (Typ.)   Cold start 45A/230VAC
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1-5V / CH2-24V

 Rated Current

 CH1-2.2A / CH2-1A

 Current Range

 0 ~ 4A / 0~ 1.3A

 Rated Power

 35W

 Ripple & Noise(max.) note.2

 80mVp-p / 120mVp-p

 Voltage ADJ. Range

 CH1:4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±5.0%

 Line Regulation note.4

 ±0.5% / ±1.5%

 Load egulation note.5  ±0.5% / ±2.0%
 Setup, Rise time  500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  80ms/230VAC 16ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 CH1:5.75 ~ 6.75V

 Protection type : Shut down o/p voltage, re-power on to recover

SAFETY & EMC

 Safety Standards

 UL62368-1, TUV EN62368-1, EAC TP TC 004 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:2KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

 EMC Emission  Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC Immunity  Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1, light industry level, criteria A

OTHERS

 MTBF

 179Khrs min. MIL-HDBK-217F (25°C)

 Case size

 99 X 82 X 36 mm

 Weight  300 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"

 NOTE7. The anbient temperature deratin of 3.5°C/1000m with fanless models and of 5°c/1000m with fan models for operating altitude higher than 2000m(6500ft).


창닫기
RD35-B R Series [제조사:민웰 - 생산국:China]
[입력전압: 88 ~ 264VAC 125 ~ 373VDC V], [출력전압/전류CH1: 5V/2.2A], [출력전압/전류CH2: 24V/1A], 35W, dual, Isolated, Screw, Unit, 300g

10개
1~1 : 18,500원
2~9 : 18,300원
10~19 : 18,100원
20~29 : 17,800원
30~39 : 17,600원
40~99 : 17,400원
판매중


21

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 79%

 AC Current (Typ.)

 0.8A / 115VAC 0.55A / 230VAC

 Inrush Current (Typ.)   Cold start 45A/230VAC
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1-5V / CH2-12V

 Rated Current

 CH1-4A / CH2-1A

 Current Range

 0 ~ 6A / 0~ 2A

 Rated Power

 54W

 Ripple & Noise(max.) note.2

 80mVp-p / 120mVp-p

 Voltage ADJ. Range

 CH1:4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±7.0%

 Line Regulation note.4

 ±0.5% / ±1.5%

 Load egulation note.5  ±0.5% / ±3.0%
 Setup, Rise time  500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  60ms/230VAC 10ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 CH1:5.75 ~ 6.75V

 Protection type : Hiccup mode, recovers automatically after fault condition is removed

SAFETY & EMC

 Safety Standards

 UL62368-1, TUV EN62368-1, EAC TP TC 004 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:2KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

 EMC Emission  Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC Immunity  Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1, light industry level, criteria A

OTHERS

 MTBF

 179Khrs min. MIL-HDBK-217F (25°C)

 Case size

 99 X 97 X 36 mm

 Weight  410 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"

 NOTE7. The anbient temperature deratin of 3.5°C/1000m with fanless models and of 5°c/1000m with fan models for operating altitude higher than 2000m(6500ft).


창닫기
RD50-A RD Series [제조사:민웰 - 생산국:China]
[입력전압: 88 ~ 264VAC 125 ~ 373VDC V], [출력전압/전류CH1: 5V/6A], [출력전압/전류CH2: 12V/2A], 54W, dual, Isolated, Screw, Unit, 효율:78%, 410g

10개
1~1 : 21,200원
2~9 : 21,000원
10~19 : 20,800원
20~29 : 20,400원
30~39 : 20,100원
40~99 : 19,900원
판매중


20

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 79%

 AC Current (Typ.)

 0.8A / 115VAC 0.55A / 230VAC

 Inrush Current (Typ.)   Cold start 45A/230VAC
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1-5V / CH2-12V

 Rated Current

 CH1-4A / CH2-1A

 Current Range

 0 ~ 6A / 0~ 2A

 Rated Power

 54W

 Ripple & Noise(max.) note.2

 80mVp-p / 120mVp-p

 Voltage ADJ. Range

 CH1:4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±7.0%

 Line Regulation note.4

 ±0.5% / ±1.5%

 Load egulation note.5  ±0.5% / ±3.0%
 Setup, Rise time  500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  60ms/230VAC 10ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 CH1:5.75 ~ 6.75V

 Protection type : Hiccup mode, recovers automatically after fault condition is removed

SAFETY & EMC

 Safety Standards

 UL62368-1, TUV EN62368-1, EAC TP TC 004 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:2KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

 EMC Emission  Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC Immunity  Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1, light industry level, criteria A

OTHERS

 MTBF

 179Khrs min. MIL-HDBK-217F (25°C)

 Case size

 99 X 97 X 36 mm

 Weight  410 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"

 NOTE7. The anbient temperature deratin of 3.5°C/1000m with fanless models and of 5°c/1000m with fan models for operating altitude higher than 2000m(6500ft).


창닫기
RD50-B RD Series [제조사:민웰 - 생산국:China]
[입력전압: 88 ~ 264VAC 125 ~ 373VDC V], [출력전압/전류CH1: 5V/6A], [출력전압/전류CH2: 12V/2A], 54W, dual, Isolated, Screw, Unit, 효율:79%, 410g

10개
1~1 : 21,200원
2~9 : 21,000원
10~19 : 20,800원
20~29 : 20,400원
30~39 : 20,100원
40~99 : 19,900원
판매중


19

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 78%

 AC Current (Typ.)

 2A / 115VAC 1.2A / 230VAC

 Inrush Current (Typ.)   Cold start 50A/230VAC
 Leakage Current  <2mA / 240VAC

 OUTPUT

 DC Voltage

 CH1-5V / CH2-12V

 Rated Current

 CH1-6A / CH2-3A

 Current Range

 0 ~ 8A / 0~ 4A

 Rated Power

 66W

 Ripple & Noise(max.) note.2

 80mVp-p / 120mVp-p

 Voltage ADJ. Range

 CH1:4.75 ~ 5.5V

 Voltage Tolerance note.3

 ±2.0% / ±6.0%

 Line Regulation note.4

 ±0.5% / ±1.5%

 Load egulation note.5  ±0.5% / ±3.0%
 Setup, Rise time  500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load
 Hold up time (Typ.)  60ms/230VAC 14ms/115VAC at full load

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 CH1:5.75 ~ 6.75V

 Protection type : Hiccup mode, recovers automatically after fault condition is removed

SAFETY & EMC

 Safety Standards

 UL62368-1, TUV EN62368-1, EAC TP TC 004 approved

 Withstand Voltage

 I/P-O/P:3KVAC  I/P-FG:2KVAC  O/P-FG:0.5KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

 EMC Emission  Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC Immunity  Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1, light industry level, criteria A

OTHERS

 MTBF

 265.9Khrs min. MIL-HDBK-217F (25°C)

 Case size

 129 X 98 X 38 mm

 Weight  440 g

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed

  that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testin of component power supplies"

 NOTE7. The anbient temperature deratin of 3.5°C/1000m with fanless models and of 5°c/1000m with fan models for operating altitude higher than 2000m(6500ft).


창닫기
RD65-A RD Series [제조사:민웰 - 생산국:China]
[입력전압: 88 ~ 264VAC 125 ~ 373VDC V], [출력전압/전류CH1: 5V/6A], [출력전압/전류CH2: 12V/3A], 66W, dual, Isolated, Screw, Unit, 효율:78%, 440g

10개
1~1 : 23,500원
2~9 : 23,300원
10~19 : 23,000원
20~29 : 22,600원
30~39 : 22,300원
40~99 : 22,100원
판매중


[1][2]