AC-DC 분류검색 (총:617개)
   UNIT type | Single (1CH) (348개)   Dual (2CH) (38개)   Triple (3CH) (17개)  
   MODULE type | Single (1CH) (92개)   Dual (2CH) (8개)   Triple (3CH) (3개)  
   OPEN PCB type | Single (1CH) (46개)   Dual (2CH) (10개)   Triple (3CH) (2개)  
   CHASSIS type | Single (1CH) (14개)  
   DIN Rail type | Single (1CH) (39개)  
   제조업체별 검색 | DANUBE (37개) 델타 (18개) 민웰 (231개) 은성파워 (15개) 지엠텍 (10개) 코텍 (152개) 파워렉스 (42개) 파워프라자 (111개) 피닉스 (1개)
   TIP: 실시간 검색시 CTRL+클릭 또는 마우스 드래그 하시면 멀티선택을 할 수 있습니다.
AC-DC 실시간검색 (총:617개)
절연방식

[초기화]
 
케이스타입

[초기화]
 
시리즈명

[초기화]
 
출력수

[초기화]
 
출력전력(W)

[초기화]
 
입력전압 (AC)

[초기화]
 
입력전압 (DC)

[초기화]
 
출력전압CH1

[초기화]
 
출력전류CH1

[초기화]
 
출력전압CH2

[초기화]
 
출력전류CH2

[초기화]
 
출력전압CH3

[초기화]
 
출력전류CH3

[초기화]
 
사이즈(WxHxD)mm

[초기화]
 
                    
  37 개의 제품이 검색되었습니다.
No 이미지 제품설명 ※인증서보기 인증마크 클릭※ 재고 자료 수량가격 (VAT별도) 분류 구매
37

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 68%

 AC Current (Typ.)

 0.12A/115VAC 0.08A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 3.3V

 Rated Current

 1.25A

 Current Range

 0~1.25A

 Rated Power

 4.125W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-0.5%

 Setup, Rise time

 600ms,30ms at full load

 Hold up Time (Typ.)

 80ms/230VAC 15ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 3.8~4.95V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 1495.8Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 25.4 X 21.5 X 45.7

 Weight

 40g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM05-3.3 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 3.3V/1.25A], 5W, single, Isolated, OnBoard, Module, 효율:68%, 40g

0개
1~9 : 7,500원
10~49 : 7,400원
50~99 : 7,400원
100~149 : 7,300원
300~499 : 7,300원
판매중


36

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 71%

 AC Current (Typ.)

 0.12A/115VAC 0.08A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 5V

 Rated Current

 1A

 Current Range

 0~1A

 Rated Power

 5W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-0.5%

 Setup, Rise time

 600ms,30ms at full load

 Hold up Time (Typ.)

 80ms/230VAC 15ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 5.75~6.75V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 1495.8Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 25.4 X 21.5 X 45.7

 Weight

 40g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM05-5 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 5V/1A], 5W, single, Isolated, OnBoard, Module, 효율:71%, 40g

51개
1~9 : 7,500원
10~49 : 7,400원
50~99 : 7,400원
100~149 : 7,300원
300~499 : 7,300원
추천
제품


35

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 75%

 AC Current (Typ.)

 0.12A/115VAC 0.08A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 12V

 Rated Current

 0.42A

 Current Range

 0~0.42A

 Rated Power

 5.04W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-0.5%

 Setup, Rise time

 600ms,30ms at full load

 Hold up Time (Typ.)

 80ms/230VAC 15ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 13.8~16.2V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 1495.8Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 25.4 X 21.5 X 45.7

 Weight

 40g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM05-12 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 12V/0.42A], 5W, single, Isolated, OnBoard, Module, 효율:75%, 40g

34개
1~9 : 7,500원
10~49 : 7,400원
50~99 : 7,400원
100~149 : 7,300원
300~499 : 7,300원
판매중


34

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 75%

 AC Current (Typ.)

 0.12A/115VAC 0.08A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 15V

 Rated Current

 0.33A

 Current Range

 0~0.33A

 Rated Power

 4.95W

 Ripple & Noise(max.) Note.2

 300mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-0.5%

 Setup, Rise time

 600ms,30ms at full load

 Hold up Time (Typ.)

 80ms/230VAC 15ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 17.25~20.25V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 1495.8Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 25.4 X 21.5 X 45.7

 Weight

 40g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM05-15 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 15V/0.33A], 5W, single, Isolated, OnBoard, Module, 효율:75%, 40g

42개
1~9 : 7,500원
10~49 : 7,400원
50~99 : 7,400원
100~149 : 7,300원
300~499 : 7,300원
판매중


33

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 77%

 AC Current (Typ.)

 0.12A/115VAC 0.08A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 24V

 Rated Current

 0.23A

 Current Range

 0~0.23A

 Rated Power

 5.52W

 Ripple & Noise(max.) Note.2

 480mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-0.5%

 Setup, Rise time

 600ms,30ms at full load

 Hold up Time (Typ.)

 80ms/230VAC 15ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 27.6~32.4V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 1495.8Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 25.4 X 21.5 X 45.7

 Weight

 40g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM05-24 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 24V/0.23A], 5W, single, Isolated, OnBoard, Module, 효율:77%, 40g

44개
1~9 : 7,500원
10~49 : 7,400원
50~99 : 7,400원
100~149 : 7,300원
300~499 : 7,300원
판매중


32

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 74%

 AC Current (Typ.)

 0.25A/115VAC 0.15A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 3.3V

 Rated Current

 2.5A

 Current Range

 0~2.5A

 Rated Power

 8.25W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-0.5%

 Setup, Rise time

 600ms,30ms at full load

 Hold up Time (Typ.)

 30ms/230VAC 8ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 3.8~4.95V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 1495.8Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 25.4 X 21.5 X 45.7

 Weight

 40g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM10-3.3 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 3.3V/2.5A], 10W, single, Isolated, OnBoard, Module, 효율:74%, 40g

0개
1~9 : 8,200원
10~49 : 8,100원
50~99 : 8,000원
100~149 : 8,000원
300~499 : 8,000원
판매중


31

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 78%

 AC Current (Typ.)

 0.25A/115VAC 0.15A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 5V

 Rated Current

 2A

 Current Range

 0~2A

 Rated Power

 10W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-0.5%

 Setup, Rise time

 600ms,30ms at full load

 Hold up Time (Typ.)

 30ms/230VAC 8ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 5.75~6.75V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 1495.8Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 25.4 X 21.5 X 45.7

 Weight

 40g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM10-5 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 5V/2A], 10W, single, Isolated, OnBoard, Module, 효율:78%, 40g

38개
1~9 : 8,200원
10~49 : 8,100원
50~99 : 8,000원
100~149 : 8,000원
300~499 : 8,000원
판매중


30

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 82%

 AC Current (Typ.)

 0.25A/115VAC 0.15A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 12V

 Rated Current

 0.85A

 Current Range

 0~0.85A

 Rated Power

 10.2W

 Ripple & Noise(max.) Note.2

 240mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-0.5%

 Setup, Rise time

 600ms,30ms at full load

 Hold up Time (Typ.)

 30ms/230VAC 8ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 13.8~16.2V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 1495.8Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 25.4 X 21.5 X 45.7

 Weight

 40g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM10-12 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 12V/0.85A], 10W, single, Isolated, OnBoard, Module, 효율:82%, 40g

42개
1~9 : 8,200원
10~49 : 8,100원
50~99 : 8,000원
100~149 : 8,000원
300~499 : 8,000원
판매중


29

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 82%

 AC Current (Typ.)

 0.25A/115VAC 0.15A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 15V

 Rated Current

 0.67A

 Current Range

 0~0.67A

 Rated Power

 10.05W

 Ripple & Noise(max.) Note.2

 300mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-0.5%

 Setup, Rise time

 600ms,30ms at full load

 Hold up Time (Typ.)

 30ms/230VAC 8ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 17.25~20.25V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 1495.8Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 25.4 X 21.5 X 45.7

 Weight

 40g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM10-15 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 15V/0.67A], 10W, single, Isolated, OnBoard, Module, 효율:82%, 40g

53개
1~9 : 8,200원
10~49 : 8,100원
50~99 : 8,000원
100~149 : 8,000원
300~499 : 8,000원
판매중


28

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 82%

 AC Current (Typ.)

 0.25A/115VAC 0.15A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 24V

 Rated Current

 0.42A

 Current Range

 0~0.42A

 Rated Power

 10.08W

 Ripple & Noise(max.) Note.2

 480mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-0.5%

 Setup, Rise time

 600ms,30ms at full load

 Hold up Time (Typ.)

 30ms/230VAC 8ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 27.6~32.4V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 1495.8Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 25.4 X 21.5 X 45.7

 Weight

 40g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM10-24 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 24V/0.42A], 10W, single, Isolated, OnBoard, Module, 효율:82%, 40g

46개
1~9 : 8,200원
10~49 : 8,100원
50~99 : 8,000원
100~149 : 8,000원
300~499 : 8,000원
판매중


27

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 74%

 AC Current (Typ.)

 0.35A/115VAC 0.2A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 3.3V

 Rated Current

 3.5A

 Current Range

 0~3.5A

 Rated Power

 11.55W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.5%

 Load Regulation

 +/-1%

 Setup, Rise time

 1000ms,20ms at full load

 Hold up Time (Typ.)

 40ms/230VAC 10ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 3.8~4.95V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 970.3Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 27.2 X 24 X 52.4

 Weight

 59g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM15-3.3 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 3.3V/3.5A], 15W, single, Isolated, OnBoard, Module, 효율:74%, 59g

0개
1~9 : 9,200원
10~49 : 9,100원
50~99 : 9,000원
100~149 : 9,000원
300~499 : 8,900원
판매중


26

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 78%

 AC Current (Typ.)

 0.35A/115VAC 0.2A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 5V

 Rated Current

 3A

 Current Range

 0~3A

 Rated Power

 15W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-1%

 Setup, Rise time

 1000ms,20ms at full load

 Hold up Time (Typ.)

 40ms/230VAC 10ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 5.75~6.75V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 970.3Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 27.2 X 24 X 52.4

 Weight

 59g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM15-5 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 5V/3A], 15W, single, Isolated, OnBoard, Module, 효율:78%, 59g

53개
1~9 : 9,200원
10~49 : 9,100원
50~99 : 9,000원
100~149 : 9,000원
300~499 : 8,900원
판매중


25

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 82%

 AC Current (Typ.)

 0.35A/115VAC 0.2A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 12V

 Rated Current

 1.25A

 Current Range

 0~1.25A

 Rated Power

 15W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-1%

 Setup, Rise time

 1000ms,20ms at full load

 Hold up Time (Typ.)

 40ms/230VAC 10ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 13.8~16.2V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 970.3Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 27.2 X 24 X 52.4

 Weight

 59g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM15-12 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 12V/1.25A], 15W, single, Isolated, OnBoard, Module, 효율:82%, 59g

23개

1~9 : 9,200원
10~49 : 9,100원
50~99 : 9,000원
100~149 : 9,000원
300~499 : 8,900원
판매중


24

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 82%

 AC Current (Typ.)

 0.35A/115VAC 0.2A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 15V

 Rated Current

 1A

 Current Range

 0~1A

 Rated Power

 15W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-1%

 Setup, Rise time

 1000ms,20ms at full load

 Hold up Time (Typ.)

 40ms/230VAC 10ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 17.25~20.25V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 970.3Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 27.2 X 24 X 52.4

 Weight

 59g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM15-15 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 15V/1A], 15W, single, Isolated, OnBoard, Module, 효율:82%, 59g

41개
1~9 : 9,200원
10~49 : 9,100원
50~99 : 9,000원
100~149 : 9,000원
300~499 : 8,900원
판매중


23

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 83%

 AC Current (Typ.)

 0.35A/115VAC 0.2A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 24V

 Rated Current

 0.63A

 Current Range

 0~63A

 Rated Power

 15.12W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.3%

 Load Regulation

 +/-1%

 Setup, Rise time

 1000ms,20ms at full load

 Hold up Time (Typ.)

 40ms/230VAC 10ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 27.6~32.4V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 970.3Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 27.2 X 24 X 52.4

 Weight

 59g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM15-24 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 24V/0.63A], 15W, single, Isolated, OnBoard, Module, 효율:83%, 59g

39개
1~9 : 9,200원
10~49 : 9,100원
50~99 : 9,000원
100~149 : 9,000원
300~499 : 8,900원
판매중


22

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 76%

 AC Current (Typ.)

 0.6A/115VAC 0.4A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 3.3V

 Rated Current

 4.5A

 Current Range

 0~3.5A

 Rated Power

 14.85W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.5%

 Load Regulation

 +/-1%

 Setup, Rise time

 1000ms,20ms at full load

 Hold up Time (Typ.)

 40ms/230VAC 10ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 3.8~4.95V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 970.3Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 27.2 X 24 X 52.4

 Weight

 59g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM20-3.3 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 3.3V/4.5A], 20W, single, Isolated, OnBoard, Module, 효율:76%, 59g

0개
1~9 : 10,000원
10~49 : 9,900원
50~99 : 9,800원
100~149 : 9,800원
300~499 : 9,700원
판매중


21

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 76%

 AC Current (Typ.)

 0.6A/115VAC 0.4A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 3.3V

 Rated Current

 4.5A

 Current Range

 0~3.5A

 Rated Power

 14.85W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.5%

 Load Regulation

 +/-1%

 Setup, Rise time

 1000ms,20ms at full load

 Hold up Time (Typ.)

 40ms/230VAC 10ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 3.8~4.95V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 970.3Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 27.2 X 24 X 52.4

 Weight

 59g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM20-5 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 5V/4A], 20W, single, Isolated, OnBoard, Module, 효율:79%, 59g

27개
1~9 : 9,500원
10~49 : 9,400원
50~99 : 9,300원
100~149 : 9,300원
300~499 : 9,200원
판매중


20

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 84%

 AC Current (Typ.)

 0.6A/115VAC 0.4A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 12V

 Rated Current

 1.8A

 Current Range

 0~1.8A

 Rated Power

 20W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.5%

 Load Regulation

 +/-1%

 Setup, Rise time

 1000ms,20ms at full load

 Hold up Time (Typ.)

 40ms/230VAC 10ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 13.8~16.2V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 970.3Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 27.2 X 24 X 52.4

 Weight

 59g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM20-12 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 12V/1.8A], 20W, single, Isolated, OnBoard, Module, 효율:84%, 59g

35개
1~9 : 10,000원
10~49 : 9,900원
50~99 : 9,800원
100~149 : 9,800원
300~499 : 9,700원
판매중


19

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 84%

 AC Current (Typ.)

 0.6A/115VAC 0.4A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 15V

 Rated Current

 1.4A

 Current Range

 0~1.4A

 Rated Power

 21W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.5%

 Load Regulation

 +/-1%

 Setup, Rise time

 1000ms,20ms at full load

 Hold up Time (Typ.)

 40ms/230VAC 10ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 17.25~20.25V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 970.3Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 27.2 X 24 X 52.4

 Weight

 59g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM20-15 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 15V/1.4A], 20W, single, Isolated, OnBoard, Module, 효율:84%, 59g

20개
1~9 : 10,000원
10~49 : 9,900원
50~99 : 9,800원
100~149 : 9,800원
300~499 : 9,700원
판매중


18

제품의 사양

 INPUT

 Voltage Range

 AC85 ~ 264V (or DC120 ~ 370V)

 Frequency Range

 47 ~440Hz

 Efficiency

 85%

 AC Current (Typ.)

 0.6A/115VAC 0.4A/230VAC

 Inrush current

 COLD START 20A/115VAC  40A/230VAC 

 Leakage current

 <0.75mA/240VAC

 OUTPUT

 DC Voltage

 24V

 Rated Current

 0.9A

 Current Range

 0~0.9A

 Rated Power

 21.6W

 Ripple & Noise(max.) Note.2

 200mVp-p

 Voltage Tolerance Note.3

 +/-2.5%

 Line Regulation

 +/-0.5%

 Load Regulation

 +/-1%

 Setup, Rise time

 1000ms,20ms at full load

 Hold up Time (Typ.)

 40ms/230VAC 10ms/115VAC at full load

PROTECTION

CIRCUIT

 Over Load

 115%~190% rated output power

 Protection type: Hiccup mode, recovers automatically after fault condition is removed

 Over Voltage

 27.6~32.4V

 Protection type : Shut off o/p voltage, clamping by zener diode

SAFETY &

EMC(Note.4)

 Safety standards

 UL60950-1, TUV EN60950-1 approved

 Withstand Voltage

 I/P-O/P:3KVAC

 Isolation Resistance

 I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

 EMC Emission

 Compliance to EN55022(CISPR22)Class B, EN610000-3-2,-3

 EMC Immunity

 Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024,heavy industry level,(surgeL-N:1KV)

OTHERS

 MTBF

 970.3Khrs min. MIL-HDBK-217F (25°C)

 Dimension (WXHXL)

 27.2 X 24 X 52.4

 Weight

 59g

 NOTE :

 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

 2. Ripple & noise are measured at 20Mz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.

 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 4. The power suuply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


창닫기
IRM20-24 IRM Series [제조사:DANUBE - 생산국:China]
[입력전압: AC85~264 or DC120~370V], [출력전압/전류CH1: 24V/0.9A], 20W, single, Isolated, OnBoard, Module, 효율:85%, 59g

45개
1~9 : 9,500원
10~49 : 9,400원
50~99 : 9,300원
100~149 : 9,300원
300~499 : 9,200원
판매중


[1][2]