제품의 특징

제품의 요약

 - Universal AC input/Full range (와이드 입력범위)

 - Withstand 300VAC surge input for 5 second

 - No load power consumption<0.2W (무부하시 0.2W 이하)

 - Miniature size and 1U low profile (1U타입의 초소형 사이즈)

 - High operating temperature up to 70°C

 - Short circuit (단락 보호회로 장착)

 - Overload (과부하 보호회로 장착)

 - Over voltage (과전압 보호회로 장착)

 - Cooling by free air convection

 - Operating altitude up to 5000 meters(Note.8)

 - Withstand 5G vibration test

 - High efficiency,long life and high reliability

 - LED indicator for power on

 - 100% full load burn-in test

 - 3 years warranty

제품의 환경

 - Working temperature

 - Working temperature Humidity

 - Storage temperature and Humidity

 - Temperature Coefficient

 - Vibration

 -30°C ~ 70°C (Refer to Derating Curve)

 20~90% RH non-condensing

 -40°C ~ 85°C, 10~95% RH

 ±0.03% / °C (0~50°C)

 10~500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

제품의 사양

 INPUT

 Voltage Range

 85~264VAC or 120 ~ 370VDC

 Frequency Range

 47 ~ 63Hz

 Efficiency (Typ.)

 88%

 AC Current (Typ.)

 0.7A / 115VAC 0.42A / 230VAC

 OUTPUT

 DC Voltage

 24V

 Rated Current

 1.5A

 Current Range

 0 ~1.5A

 Rated Power

 35W

 Ripple & Noise(max.) note.2

 150mVp-p

 Voltage ADJ. Range

 21.6 ~ 28.8V

 Voltage Tolerance note.3

 ±1.0%

 Line Regulation note.4

 ±0.5%

PROTECTION

 Over load

 110 ~ 150% rated output power

 Protection type : Hiccup mo, recovers automatically after fault condition is removed

 Over voltage

 28.8 ~ 33.6V

 Protection type : Shut down o/p voltage, re-power on to recover

 Safety Standards

 UL60950-1, TUV EN60950-1,EN60335-1,EN61558-1/-2-16,CCC GB4943 approved

 Withstand Voltage

 I/P-O/P:3.75KVAC  I/P-FG:2KVAC  O/P-FG:1.25KVAC

 Isolation Resistance

 I/P-O/P, I/P-FG, O/P-FG:100M Ohm / 500VDC / 25°C / 70% RH

OTHERS

 MTBF

 763.6Khrs min. MIL-HDBK-217F (25°C)

 Case size

 82 X 30 X 99 mm

 NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

 NOTE2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

 NOTE3. Tolerance : includes set up tolerance, line regulation and load regulation.

 NOTE4. Line regulation is measured from low line to high line at rated load.

 NOTE5. Load regulation is measured from 0% to 100% rated load.

 NOTE6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.

 NOTE7. 5V when the load factor 0~50%, the switching power less is reduced by burst operation, which will cause ripple and ripple noise to go beyond the specifications.

 NOTE8. The ambient temperature derating of 5°C/1000m is needed for operating altitude greater than 2000m(6500ft).

 NOTE9. The power supply is considered a component which will be install into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests,please refer to "EMI testing of component power supplies."